Description
Fits 2016-2024 Chevrolet Camaro SS with 6.2L EngineThe Hurst Stage One Spring Kit for the 2016-2024 Chevrolet Camaro SS (coupe and convertible) with the 6.2L engine is an excellent choice for firming up the handling of your car and giving it that “just right” stance. These springs will lower your car by approximately one-inch front and rear, closing up the fender gap and lowering your center of gravity for improved handling and braking. This provides a better overall driving feel while maintaining a street-friendly experience. The springs are manufactured in the U.S. and are powder coated in the Hurst hammered gold tone. Professional installation is recommended as special tools are needed and the vehicle will require a wheel alignment after installation.
Information:
Fits 2016-2024 Chevrolet Camaro SS models with the 6.2L engine.
Application Summary:
| Year | Make/Model |
|---|---|
| 2016-2024 | Chevrolet Camaro |
| Attributes | |
| Automotive Item Grade | High Performance |
| Brand | Hurst, Hurst |
| Bullet Point #1 | Improves Handling Performance |
| Bullet Point #2 | Perfect Muscle Car Stance |
| Bullet Point #3 | Daily Driver / Street Friendly |
| Bullet Point #4 | Lowers Vehicle Center of Gravity |
| Bullet Point #5 | Improves Aerodynamic Efficiency |
| Bushings Included | No, No |
| Category | Suspension |
| Coil End Type (1) | Pigtail, Pigtail |
| Coil End Type (2) | Pigtail, Pigtail |
| Constant or Variable Spring Rate | Constant(FRONT)/Variable (REAR), Constant(FRONT)/Variable (REAR) |
| Country of Origin (Primary) | US |
| Emission Code | 5, 5 |
| Harmonized Tariff Code (Schedule B) | 7320201000 |
| Hazardous Material Code | N |
| Item Grade | High Performance, High Performance |
| Life Cycle Status Code | Available to Order |
| Long Description | Suspension Kit |
| Maximum Compressed Diameter | 6.950 in. (Front)/3.790 in. (Rear) |
| Maximum Compressed Length | 2.200 in. (Front)/6.500 in. (Rear) |
| NAFTA Preference Criterion Code | B |
| Package Contents | 2 front springs & 2 rear springs |
| Package Quantity | 4, 4 |
| Part Type | Suspension Kit |
| Position | Front and Rear |
| Position on Vehicle | FRONT/REAR, Front/Rear |
| Product Type | Coil Spring, Coil Spring |
| Progressive Rate Spring | 420-550 LBS/IN (REAR), 420-550 LBS/IN (REAR) |
| SDR Required Flag | N |
| SDS Sheet Number | N |
| Short Description | Suspension Kit |
| Spring Color | Gold Powdercoat |
| Spring Color/Finish | Hurst Gold Powdercoat |
| Spring Maximum Compressed Diameter (in) | 6.950″(FRONT)/3.790″(REAR), 6.950″(FRONT)/3.790″(REAR) |
| Spring Maximum Compressed Length (in) | 2.20″(FRONT)6.5:(REAR), 2.20″(FRONT)6.5:(REAR) |
| Spring Rate | 150 LBS/IN (FRONT), 150 LBS/IN (FRONT) |
| Spring Rate (lbs./in.) | 420-550 (Rear) |
| Spring Rate Type | Constant (Front)/Variable (Rear) |
| Spring Uncompressed Diameter | 6.850 in. (Front)/3.790 in. (Rear) |
| Spring Uncompressed Diameter (in) | 6.850(FRONT)/3.790(REAR), 6.850(FRONT)/3.790(REAR) |
| Spring Uncompressed Length | 11.200 in. (Front)/12.000 in. (Rear) |
| Spring Uncompressed Length (in) | 11.2(FRONT)/12.0(REAR), 11.2(FRONT)/12.0(REAR) |
| Sub Category | Suspension, Springs and Related Components |
| Use Location | SUSPENSION, Suspension |
| GTIN | 00084829822517 |
