Description
Magnaflow OEM Grade Direct-Fit Catalytic ConverterKeep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-832. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2007-2008 Ford F-150 4.6L. MagnaFlow 21-832 interchanges with OE parts 7L3Z-5E212-FA, 7L3Z-5E212-S, 8L3Z-5E212-J. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Simplifies installation with essential gaskets and hardware being included in the box
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year | Make/Model |
|---|---|
| 2007-2008 | Ford F-150 |
| Attributes | |
| Air Tube Adaptable | No |
| Body Height | 5.000 in., 5 |
| Body Length | 11.000 in., 11 |
| Body Material | Stainless Steel |
| Body Shape | Round |
| Body Type | Spun, Spun |
| Body Width | 5.000 in., 5 |
| California Air Resources Board (CARB) Certified | No |
| CARB Executive Order Number | Not Applicable, Not Applicable |
| Catalytic Converter Air Tube Adapter | No |
| Clamps Included | No, No |
| Converter Quantity | 1 |
| Core Substrate Material | Ceramic |
| Country of Origin (Primary) | US |
| Emission Code | Not in CA |
| Finish | Stainless Steel, Stainless Steel |
| Gasket Or Seal Included | No |
| Grade Type | Regular |
| Hanger Included | No |
| Hangers Included | No |
| Harmonized Tariff Code (Schedule B) | 8421320000 |
| Hazardous Material Code | N |
| Heat Shield Attached | No, No |
| Inlet Attachment Type | Bolt-On |
| Inlet Diameter | 2.500 in. |
| Inlet Gasket Included | No |
| Inlet Inside Diameter | 2.500 in., 2.5 |
| Inlet Mounting Hardware Included | No |
| Inlet Quantity | 1, 1 |
| Inlet Type | Flange |
| Life Cycle Status Code | Available to Order |
| Main Piping Diameter | 2.500 in. |
| Material | Stainless Steel, Stainless Steel |
| Mounting Hardware Included | No |
| NAFTA Preference Criterion Code | B |
| New York Certified | No |
| Outlet Attachment Type | Clamp-On |
| Outlet Diameter | 2.500 in. |
| Outlet Gasket Included | No, No |
| Outlet Inside Diameter | 2.5, 2.5 |
| Outlet Mounting Hardware Included | No, No |
| Outlet Outside Diameter | 2.500 in. |
| Outlet Quantity | 1, 1 |
| Outlet Type | Clamp-On, Clamp-On |
| Overall Length | 32.625 in., 31 |
| Oversize Shipping | 888563149325 |
| Oxygen Sensor Location | Pre Converter and Midbed |
| SDR Required Flag | N |
| Sensor Port Count | 2, 2 |
| Series | OEM Grade, OEM Grade |
| Substrate Material | Ceramic, Ceramic |
| Subtitles | Federal / EPA Compliant |
| Tube Material | Stainless Steel, Stainless Steel |
| Type | Direct-Fit |
| Universal of Specific Fit | Specific |
| Universal Or Specific Fit | Specific, Specific |
| Warranty Time | 5 |
| GTIN | 00888563149325 |
